Assembling Your Blender - ChefScape L5746A Manual De Instrucciones

The powerful 1000-watt motor, specially designed stainless steel blades, and
variable speed operation work together to precisely blend and chop all types of
ingredients for exact recipe specifications. The smoothie maker blade base has
been specifically designed with heavy, stainless steel blades to easily crush ice and
frozen fruit. The blade base can also be used to make smoothies and other frozen
drinks. Both are built to accommodate the revolutionary stir stick, which when
rotated counter-clockwise, increases blending efficiency. The 56-ounce
polycarbonate blending jar has a spill-proof pour spout and is dishwasher safe.
Before assembling your blender, wash all parts, except for the motor base in
warm, soapy water, rinse thoroughly and dry. Unscrew and disassemble the valve
for cleaning (see Cleaning Your Appliance section). To prolong the life of your
appliance, do not wash parts in the dishwasher.
Stir Stick
Lid
Blending Jar
Rubber Gasket
Blending Blade Base
Motor Base
To use your Chefscape
1. Position the rubber gasket down onto the circular flat surface in the blade base.
2. Place the bottom threaded section of the blending jar down into the blade base.
Engage the threads by twisting the blade base clockwise until tightened onto the
jar. Make sure that the blade base is tightly fastened to the jar and that the
rubber gasket is properly compressed between the jar and the blade base.
3. Push the lid onto the top of the blending jar. Place the clear lid cap in the center
of the lid or place the stir stick through the center of the lid.
4. Place the blending jar onto the motor base so that the bottom of the blade base
is sitting flat on the motor base. Turn clockwise to lock into place.
Plug cord into a 120-volt, AC electrical outlet ONLY.
5.
A
SSEMBLING
®
Blender, begin by assembling the blending jar.
Y B
OUR LENDER
4
Lid Cap
Smoothie Blade Base
Dispensing Valve