Electronic Maintenance Display - Snapper SPX310 Manual De Usuario

B Reverse Mowing Option (RMO)
C Ignition Switch
OFF
ON
START
D
Headlight Switch
E Power Take-Off (PTO)
F Power Take-Off (PTO), Engage
Blades
G Power Take-Off (PTO), Disengage
Blades
H Cruise Control
I Parking Brake Control
J Throttle Control
K Throttle Control SLOW Position
L Throttle Control FAST Position
M Choke
N
Fuel Level Gauge (if equipped)
O Ground Speed Pedals
P Seat Adjustment Lever
Q Mower Lift Lever
R Height-of-Cut Switch
S Transmission Release Lever
T Fuel Tank
U
Brake Pedal

Electronic Maintenance Display

Note: When you start the unit, the Total Hours show on the
maintenance display. The total hours will set to 0 after 999.9.
Display Total Hours, Trip Hours, and Clock
1. Push MODE (A, Figure 4) for less than 1 second to show
the Trip Hours.
2. Push RESET (B) for more than 3 seconds to set the Trip
Hours to 0.
9