SLV 470681 Instrucciones De Servicio página 2

ENGLISH
OPERATING MANUAL FOR
KELVIN CONTROL 470681 / 470682
Read this short manual carefully and keep it accessible for further
reference!
SAFETY MESSAGES
Disregard of the safety messages may lead to danger of life, burning or
fire!
 Installation, mounting or works on the electrical connection may only be
carried out by an approved electrician.
 The product may not be modified or converted.
 In case of a malfunction you may NOT touch the product or operate it
further. Disconnect the product from the power supply by an external
switch or by the fuse.
A malfunction exists when:
 visible damages appear.
 the product does not work properly (e.g. flickering).
 smoke, steam or crackling sounds appear.
 smell of burning is recognisable.
 an overheating is recognisable (e.g. by discolouration of adjacent
surfaces).
Operate the product only after maintenance and examination by an
approved electrician!
Additional safety messages are indicated by this symbol:
USE AS DIRECTED
This product serves exclusively lighting purposes and may:
 only be used with a suitable power supply unit, output voltage: 12V/DC or
24V/DC (e.g. SLV art.-no. 470548).
 only be installed according to safety class III (three).
 only be used in dry condition,
 not in damp or dirt-endangered rooms.
 not in areas of high air humidity.
 not be exposed to strong mechanical loads or to strong contamination.
INTEGRATION INTO THE KELVIN CONTROL SYSTEM
Please read the system manual – www.slv.com/kelvincontrolmanual.pdf
OPERATION
Please read the operating manual – www.slv.com/kelvincontrolmanual.pdf
STORAGE AND DISPOSAL
Storage
 The product must be stored in a dry and clean environment. Do not
strain the product mechanically during storage.
After a damp or soiling storage the product may only be installed
after checking its condition by an approved electrician.
Disposal (European Union)
 Do not dispose the product with the regular household waste! Products
marked with this sign must be disposed according to the directive(WEEE,
2012/19) on electrical and electronic devices at local collection points for
such devices!
INSTALLATION
Switch off the mains or respectively the connection lead before doing any
works!
Use only parts, which are supplied with the product or are described as
accessories!
Unpacking
 Carefully take the product out of the packaging removing any transport
safeguards.
 Before disposal of the packaging material make sure that all components of
the product are removed.
 Electrical Connection
 Prepare the power supply. Use only a suitable power supply unit, output
voltage: 12V/DC constant or 24V/DC constant (e.g. SLV art.-no.
470548).
 Lighting items with a controllable color temperature for an operating voltage of
12V/DC or 24V/DC may be connected (e.g. LED Strip 552881).
 Note that the voltage of the LED illumination is the same as the voltage of the
power supply of the controller.
 Note that the wattage of the connected LED illumination does not exceed the
wattage of the controller or the power supply.
 Establish the installation according to the installation diagram.
Hereby, SLV GmbH declares that the radio equipment described here is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of
.
conformity is available at the following internet address.
www.slv.com/jump/470681
www.slv.com/jump/470682
This radio equipment may be distributed in all countries of the EU.
art.-no. 470681 / 470682 © 31.10.2018 SLV GmbH,
Daimlerstr. 21-23, DE - 52531 Übach-Palenberg
Tel. +49 (0)2451 4833-0
Technical Details are subject to change. Made in China.
12V/DC
15m
24V/DC
max.
FHSS
2.4GHz
7dBm
max.
433.92
2700K 4000K 6500K
MHz
3000K 5000K
9dBm
27 00 K 4 000 K 6 5 00 K
max.
30 00 K 5 000 K
-
+
12VDC
24VDC
-
+
2x 1,5V
LR03
(AAA)
+
-
12V: 2x 36W
24V: 2x 72W