Wiring Scheme - Johnson Pump Ultima Bilge 600GPH Manual Del Usuario

Wiring Scheme

−
12V DC Battery
If you are using a 3-way switch, you can wire your pump to operate in the manual
over-ride or automatic operation.
As shown in the diagram, connect the black (-) ground wire to the negative terminal
of the battery. For manual over-ride operation, connect the brown wire from the
pump to the switch panel. For automatic operation, connect the brown wire with
white tracer to the switch panel. Make sure to connect an appropriate in line fuse
coming from the positive terminal of the battery to the switch panel as shown.
Wiring scheme without Panel switch
12V DC Battery
10
+
Appropriate
inline fuse
− +
Black
Brown
Manual
Off
Automatic
Three way
panel switch
Black
Brown,
not used, but sealed ends
Brown/
White
PUMP
Test Circles
Brown/
White
PUMP
Test Circles