auna Virginia Manual Del Usuario página 15

Please note:
• Due to different kinds of MP3 encoding formats, some MP3 players might not work with the VIRGINIA.
• USB extension cables are not supported.
• The system is not designed for data communication with a computer.
• MP3 files must have a bit rate of 32 - 320 kbps and a sampling rate of either 32, 44.1 or 48 kHz.
• Switch to BT mode pressing FUNCTION (7) repeatedly. The BT LED will flash, indicating the BT ready
state.
• Activate BT on your smartphone / tablet / computer and connect to „VIRGINIA".
• The LED indicates the successful connection attempt by solid light. You can now play your mobile
music library via BT.
Connect another audio device, e.g. (portable) CD player, MP3 player, (portable) cassette player, iPod, etc.
To this system via a cord with Ø3.5mm jack plugs (not supplied). Connect one end of this cord to the head-
phone jack of the external device and the other end to the aux-in jack (13) at the side of the unit. Then press
FUNCTION (7) to set to AUX mode. Start to playback your external device to enjoy your music.
Inserting the plug of your headphones into the headphone jack (14) to start to enjoy the music and keep the
volume at a reasonable level even if your headset is an open-air type designed to allow you to hear outside
sounds. Please note that excessively high volume may still block outside sounds.
The unit will switch to standby mode automatically once no any music playing over 15 minutes.
BT
AUX
Headphone
Auto-off (Energy Saving)
15