Service; Specific Safety Information; Press Tool Safety; Ridgid Contact Information - RIDGID RP 240 Manual De Isntrucciones

Ocultar thumbs Ver también para RP 240:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

RP 240/RP 241 Press Tools
• Under abusive conditions, liquid may
be ejected from the battery; avoid con-
tact. If contact accidentally occurs, flush
with water. If liquid contacts eyes, addition-
ally seek medical help. Liquid ejected from
the battery may cause irritation or burns.
• Do not use a battery pack or tool that is
damaged or modified. Damaged or mod-
ified batteries may exhibit unpredictable
behavior resulting in fire, explosion or risk of
injury.
• Do not expose a battery pack or tool to
fire or excessive temperature. Exposure
to fire or temperature above 265°F (130°C)
may cause explosion.
• Follow all charging instructions and do
not charge the battery pack or tool out-
side the temperature range specified in
the instructions. Charging improperly or at
temperatures outside the specified range
may damage the battery and increase the
risk of fire.

Service

• Have your power tool serviced by a
qual i fied repair person using on ly iden-
tical replacement parts. This will ensure
that the safety of the power tool is main-
tained.
• Never service damaged battery packs.
Service of battery packs should only be
performed by the manufacturer or author-
ized service providers.
Specific Safety
Information
WARNING
This section contains important safety in-
formation that is specific to these tools.
Read these precautions carefully before
using the press tools to reduce the risk
of electrical shock or other serious in-
jury.
SAVE ALL WARNINGS
AND INSTRUCTIONS FOR
FUTURE REFERENCE!
A compartment in the tool carrying case is in-
cluded to keep this manual with the tool for
use by the operator.

Press Tool Safety

• Keep your fingers and hands away from
4
pressing attachments during press cy -
cle. Your fingers or hands can be crushed,
fractured or amputated if they become
caught between the attachment or between
these components and any other object.
• Never attempt to repair damaged press-
ing attachments (jaws, press ring, actu-
ator, etc.). Discard the entire damaged
attachment. An attachment that has been
welded, ground, drilled or modified in any
manner can shatter during pressing re-
sulting in serious injury. Failure to replace
the entire pressing attachment may result in
component failure and serious injury.
• Large forces are generated during prod-
uct use that can break or throw parts
and cause injury. Stand clear during use
and wear appropriate protective equip-
ment, including eye protection.
• Only use RIDGID Press Tools with ap-
propriate RIDGID pressing attachments
(jaws, press ring, actuator, etc.). Other
uses or modifying the Press Tools for other
applications may damage the press tool,
damage the attachments and/or cause per-
sonal injury.
• Use proper tool, attachment and fitting
combinations. Improper combinations
can result in an incomplete joint, which in-
crease the risk of leaks, equipment dam-
age and injury.
• Before operating RIDGID
read and understand:
– This operator's manual,
– The attachment instructions,
– The battery/charger manual,
– The fitting manufacturer's installation in-
structions,
– The instructions for any other equipment
used with this tool,
Failure to follow all instructions and warn-
ings may result in property damage and/or
serious injury.
RIDGID Contact
Information
If you have any question concerning this
RIDGID
®
product:
– Contact your local RIDGID distributor.
– Visit RIDGID.com to find your local
RIDGID contact point.
– Contact Ridge Tool Technical Service
De part ment at rtctechservices@emer -
®
Press Tool,
999-995-106.10_REV. D

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Rp 241

Tabla de contenido