Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Temperature
Indicator light color
40 ºC
50 ºC
70 ºC
The indicator light will blink until reaching the tem-
perature.
3 indicator lights blinking together means
■■■
temperature sensor failure.
Danger. The device surface may be very
hot. Be careful when touching, also to select
the temperature or pressing the ON/OFF
button.
3. Insert the composite material of syringe into a slot in
the heating body.
Maintenance and cleaning
To ensure a correct, reliable and durable performance of
the unit we strongly recommend:
▪ Do not use alcohol or any other solvent to clean the
unit.
▪ Never immerse the unit in a liquid.
▪ If you notice unusual noises or vibrations, send the
unit to a technical assistance service.
▪ Use only original Mestra spare parts.
▪ Prevent material leakage into the heating body.
▪ Keep the unit clean.
▪ All the parts can be cleaned with disinfectant dish-
cloth.
White
Green
Red
▪ Don't put any parts immersed in any liquid cleaning
and disinfection,
▪ Don't disinfect under high temperature and high pres-
sure.
▪ 3 indicator lights blinking together means tempera-
ture sensor failure.
Technical data
Input: ......................... 100-240V AC 50/60Hz 0.8A Max
Output: ......................................................... 12V DC 2A
Power: ...................................................................... 24W
Temperature setting ..................................... 40-50-70 ºC
Holes diameter: ............................................. 8x Ø16 mm
Height x Width x Length: ................. 122 x 98 x 100 mm
Weight: ................................................................... 750 g
Declaration of conformity UE
The firm Talleres Mestraitua S.L.
with social address: Txori-erri Etorbidea, 60
48150 Sondika - Bilbao - Spain
Hereby declares that the product
Composite heater 080077
cumple con los requisitos de las siguientes directivas:
Meets the requirements set out in the following direc-
tives:
2014/35/UE (low tension)
2014/30/UE (electro magnetic compatibility)
Ignacio Mestraitua
Managing Director
Sondika, 2018-09-25
Publicidad
Tabla de contenido
