Assembly - Pleasant Hearth 23-412-17 Manual Del Usuario

ASSEMBLY

1. Preparing the side panels
Lay the left side panel (F) face down on a flat
surface. Insert six small connectors (BB) into
predrilled holes and secure with screws (AA).
Repeat using the right side panel (G). Lay one
upper side panel (N) face down on a flat surface.
Insert three long connectors (CC) into predrilled
holes and secure with screws (AA). Repeat using
the second upper side panel (N).
2. Preparing the upper panels and rail
Lay the left lower front panel (H), the right lower
front panel (J), both upper front panels (P), and
the front rail (M) face down on a flat surface. Insert
two short connectors (BB) into the two predrilled
holes in each panel. Secure using screws (AA).
3. Assembling the upper panels
Lay the left side panel (F) on a flat surface. Insert
three dowels (DD) into predrilled holes in the
edge of the left side panel (F). Slip the left lower
front panel (H) over the dowels (DD) as shown
and secure with screws (AA). Repeat using the
right side panel (G) and the right lower front
panel (J). Lay both upper side panels (N) on a
flat surface. Insert two dowels (DD) into predrilled
holes in the end of the upper side panels (N). Slip
the upper front panels (P) over dowels (DD) and
secure with screws (AA).
1
F
x2
N
2
H
x2
P
3
H
P
DD
6
AA
BB
G
AA
CC
AA
BB
J
M
AA
DD
F
J
x2
G
x2
N
AA