ASSEMBLY (continued)
10. Preparing the corner top panel
10
AA
Insert four dowels (DD) into the predrilled holes
on each end of the media shelf (C). Attach the
CC
upper side panel (N) assemblies by slipping over
dowels (DD) and secure using bolts (AA).
D
E
AA
BB
11. Assembling the corner top panel
11
Set the corner support (E) upright on the corner
E
panel (D) as shown and secure using a bolt (AA).
AA
D
12. Attaching the corner top panel
12
Insert four dowels (DD) into the predrilled holes
DD
in the top edge of the mantel assembly. Slip the
corner panel (D) over dowels (DD) until snug.
The lower edge of the support should be touching
D
the base edge of the mantel assembly. Secure
with bolts (AA) as shown.
AA
9