Remember
DO wash your hands with soap and
water and dry thoroughly before
handling your breast pump.
DO thoroughly clean and sterilize
all the parts of your breast pump
following the instructions below.
DO this before you use it for the first
time and after every use.
How to clean
1. Unscrew the bottle from the
pump body.
2. Pull the horn away from the pump
body and remove the duck-billed
valve.
3. Disconnect the handle from the
body by pulling away from the
body horizontally.
4. Lift out the diaphragm from the
body.
5. Pull out the connector rod from
the diaphragm.
6. Wash all parts in clean soapy
water. Don't use water that you've
used for cleaning other products.
7. Rinse thoroughly with clean
water.
8. You can also wash the pump
components in the top rack of
a dishwasher. Place the purple
duck-bill valve in the cutlery rack
or dishwasher basket to help keep
it safe.
9. Sterilize all parts of the
pump using either cold water
sterilization, microwave
sterilization, boiling water,
or electric steam sterilization.
10. For best results use Tommee
Tippee electric or microwave
sterilizers.
2