KALLISTA P72001 Manual Del Usuario página 7

2. Install the Lavatory
IMPORTANT! To mount the bracket to the wall, use fasteners
appropriate for your wall type.
Mount the brackets to the wall at the marked locations.
Install the faucet and drain to the lavatory according to the
manufacturer's instructions.
Position the pedestal on the floor.
Carefully set the lavatory on the brackets, making sure the
lavatory is supported by the pedestal.
Position the lavatory as desired.
Connect and tighten the trap to the drain. Complete the water
supply connections to the faucet according to the faucet
manufacturer's instructions.
Run water into the lavatory and check all connections for leaks.
Optional: Apply silicone sealant around the pedestal foot to
stabilize.
Kallista
Hanger
Bracket
7 1008427-2-C