Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
If you experience a problem with your appliance or are concerned
that the appliance is not functioning correctly, you can carry out
some easy checks before calling for service, please see below. You
can carry out some easy checks according to this section before
calling for service.
Warning! Don't try to repair the appliance yourself. If the problem
persists after you have made the checks mentioned below, contact
a qualified electrician, authorized service engineer or the shop
where you purchased the product.
Problem
Appliance is
not working
correctly
The light is not
working
Possible cause & Solution
Check whether the power cord is plugged
into the power outlet properly.
Check the fuse or circuit of your power supply,
replace if necessary.
The ambient temperature is too low. Try setting
the chamber temperature to a colder level to
solve this problem.
·
The LED light may be damaged. Refer to
replace LED lights in cleaning and care
chapter.
· The control system has disabled the light due
to the door being kept open too long, close and
reopens the door to reactivate the light.
-17-
Publicidad
Tabla de contenido
