Selecting A Cycle And Time - Whirlpool 2LSR5233BN0 Guía De Uso Y Cuidado

OP ER AT ING YO U R WASH ER

Selecting a cycle and time

Use the information in this section to help you make the best cycle selections for your wash
loads. Each cycle is designed for different types of fabrics and soil levels.
•
The washer pauses briefly throughout each cycle. These pauses are normal for washer operation.
•
Refer to page 8 to help you understand what happens during a wash cycle.
Super Wash cycle
Automatically prewashes the load and
advances into the REGULAR cycle (the
washer does not have to be reset after the
SUPER WASH cycle).
• Use the 6-minute cycle for heavily-soiled
loads that need maximum soil removal.
•
Use the 2-minute cycle for moderately-
soiled loads that need extra soil removal.
NOTE: For proper cleaning, use double the
amount of detergent recommended for the
load size.
Regular cycle
Features the Gentle Wash system and high
spin speeds to shorten drying time.
•
Use the 14-minute Heavy cycle to clean
sturdily-constructed cotton and linen fabrics
that are heavily soiled.
•
Use 10 minutes of wash time to clean
sturdily-constructed cotton and linen fabrics
that are moderately soiled.
6
Regular
S
inse
R
10
Heavy
14
2
Super Wash
6
Off
Soak
Off
10 6
pin
Cool
Down
Pause
Permanent
R inse
S pin
Off
inse
R
pin
S
Off
20 Delicate
Permanent Press cycle
Features the Gentle Wash system, a cool-
down rinse, and low spin speeds to reduce
wrinkling.
•
Use 6 to 10 minutes of wash time to clean
permanent press and some synthetic
fabrics that are lightly soiled to moderately
soiled.
Delicate cycle
Features a brief wash cycle and low spin
speeds to reduce wrinkling.
•
Use this cycle to clean delicate items and
washable knits that are lightly soiled to
moderately soiled.
Soak cycle
Features brief periods of agitation and soak
time to help remove heavy soils and stains
that need pretreatment.
• Use up to 20 minutes of soak time,
depending on soil level.
• Use warm water when soaking laundry.
(Hot water can set stains.) See pages
14-16 for stain removal information.
•
Use the amount of detergent or presoak
additive recommended by manufacturer.
• After the SOAK cycle ends, add detergent
and set a new wash cycle.
Press
Pull Start
Push Stop