PNI OV288 Manual De Usuario página 3

beep briefly. After another 15 seconds, the signal lights will flash, the doors
will lock and the system will return to armed mode.
To deactivate this function, switch on the ignition, press and hold for 1 second
the key on the remote control. The siren will emit a short sound, and the
signal lights will flash twice.
To activate this function, switch on the ignition, press and hold for 1 second
the key on the remote control. The siren will emit two short sounds, and
the signal lights will flash once.
Reminder for closing the doors
If the doors are not closed properly when the car is started, the signal lights
will flash continuously. To deactivate / activate this function, please read the
table with settings of the jumpers.
Automatic door lock when starting the car
If your car is equipped with a central locking system, the doors will lock
automatically 10 seconds after the car moves.
If the engine is started, but not all doors are closed, they will not lock.
After stopping the engine, the doors will unlock automatically.
While driving, press the key or to lock or unlock the doors.
To deactivate / activate this function, please read the table with settings of
the jumpers.
Car location
In armed mode, press and hold the key for 1 second. The siren will sound
for 4 seconds, time enough to locate your vehicle.
Emergency disarming
When the system is armed, if you have lost the remote control or you are
unable to disarm the system, open the door with the key, turn on the ignition,
then press the alarm reset button once to disarm the system.
3 User manual