Usb Mode; Charging Instructions - unotec CAMCAR 3 Manual Del Usario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1

usb MoDe

Connect the USB cable to the camera and press the "Power On"
button. The Camcar will show the USB menu. Two modes are
available:
1. Mass Storage:
files.
2. PC-Camera:
In this USB mode you can use the Camcar to take
photos or video chat through the computer.

charGinG instructions

The red indicator lights up when charging. The complete charging
time is about 180 minutes. The red indicator light automatically
turns off when the Camcar charges completed.
There are three options to charge the Camcar:
1. Power adapter.
2. PC-USB,
3. Car power.
Notice: Camcar can only use 5V car power supply, or it may cause
device damage. Use the supplied charging adaptor 12V/14V.
Remark: If the Camcar crashes press "reset" button to restart.
proDucts specifications
G-sensor: Built-in.
Screen: 1.5" TFT
Lens: 160º ultra wide-angle lens
Language: Russian, Japanese, French, Italian, German, spanish,
English, Chinese, Korean.
Video file: AVI
Resolution: 1080P max.
Recording video format: M-JPEG
Continuous loop video: Yes
Automatically power on/off: Yes. When connected to car power supply.
Motion Detection: Yes.
Memory: Micro SD up to 32GB. Built-in 948KB.
Photo mode: 5 megapixels.
Photo format: JPEG
Sound: MIC and Speaker
Infrared night vision: Yes
USB function: 1) USB-Disk, 2) PC-Camera
Power interface: 5V 800ma
Battery: 240mAh
In this mode we can access video files and photo
english
11

Publicidad

Tabla de contenido
loading

Productos relacionados para unotec CAMCAR 3

Este manual también es adecuado para:

12.0121.01.00

Tabla de contenido