Proper Use And Misuse Of The Machine; Guards And Safety Devices; Risks Deriving From Machine Use; Risk Of Noise - Castellari VERTIGO 30V Manual De Uso Y Mantenimiento

1.5. Proper use and misuse of the machine

The machine is intended for the exclusive use of harvesting olives through vibration.
It is intended for professional use. Operators must have proven suitability and be
capable of reading and understanding the provisions of this manual. The machine
should be used considering the standards in force on accident prevention, the use
conditions and the characteristics of the machine.
DANGER:
16 16
31 31 Pay attention not to use the machine in environments with an
explosive atmosphere, and do not use during bad weather or storms!

1.6. Guards and safety devices

32 32
The machine is equipped with safety devices to protect the operator from all its moving
parts.
Safety casing: Fixed device that prevents direct contact with units in motion or dangerous
parts of the machine. The guard can only be removed using specific tools.
When the machine is working, the safety casing should be correctly assembled.
Electrical cut-off device: It allows immediate cut-off of all the functions of the machine in
the event of an anomaly. Intervention of this guard includes emergency stoppage of the
machine. The device that caused stoppage (fuse) must be restored before re-start by
positioning, before resetting, the start button in the stop position.

1.7. Risks deriving from machine use

33 33

1.7.1. Risk of noise

The sound level was detected measuring emission with the machine in motion in
compliance with standard ISO 11201: 2010. The following values were obtained:
46 46
- Average acoustic pressure LpA (A) dB 79.72
From the values found, it was concluded that machine
operation causes a high level of noise.
During use of the machine, it is therefore compulsory for operators to use ear
protection such as earmuffs or ear plugs, to avoid damaging ears over time.

1.7.2. Risk of vibrations

The level of vibrations was measured with the machine in motion in compliance with
the standard UNI EN ISO 5349-2: 2015 to assess vibrations transmitted to the
HAND-ARM system.
The following value was obtained:
Hand-arm vibration level: 12.51 m/s
3 m.
You are advised to assess use of possible PPE according to local legislation.
20
8 8
29 29
26 26
27 27
16 16
25 25
28 28
30 30
47 47
48 48
45 45
2
54 54
Castellari S.r.l. Castellari S.r.l. • •
Castellari S.r.l. •
24 24
34-35 34-35
55 55
56 56
50 50
52 52
45 45
considering heavier use of the opened machines
VERTIGO L/C 30V VERTIGO L/C 30V
Via Lasie 16/E Via Lasie 16/E • • IMOLA (BO) IMOLA (BO)
Via Lasie 16/E • IMOLA (BO)
VERTIGO 30V VERTIGO 30V
VERTIGO 30V
41 41
36-37 36-37
39-40 39-40
38 38
57 57
43-44 43-44
51 51
53 53
REV00 - 02/09/2019 REV00 - 02/09/2019
45 45
42 42
29 29
49 49
5