NOTE:
DO NOT HIT CASTER SOCKET #12 DIRECTLY WITH
A HAMMER! SET A PIECE OF WOOD ON CASTER
SOCKET AND HIT PIECE OF WOOD TO DRIVE
CASTER SOCKET INTO U-SUPPORT #7.
16. Gently tap caster sockets #12 into U-
support #7 until flange on sockets
touches the edge of the tube.
17. Insert casters #11 into caster sockets
#12. See Figure 7B.
First Table Top
Figure 7B
10
Note: This is the end of the
table with no rails.
11
12
7