Cosatto HOLD Manual De Instrucciones página 4

notice:
1. This is a "Semi-universal" base for child restraint. It is approved to Regulation
No. 44-04 series of amendments, for general use in vehicles and it will fit most,
but not all, car seats as specied in compatibility list.
We recommend customer to check compatibility of the child restraint with the
intended vehicle prior to fitting. The compatibility list can be found on the back of the
instruction manual or our website:
http://www.cosatto.com/products/car-seats/hold-group-0-infant-car-seat/fitting
2. Only suitable if the approved vehicles are fitted with lap/ 3 point/ static/ with
retractor safety belt, approved to UN/ ECE Regulation No.16 or other equivalent
standards.
3. Never use this child car seat on passenger seat fitted with active airbag.
4. lf in doubt, consult either the child restraint manufacturer or retailer.
care
Your child car seat base has been designed to meet safety standards and with correct use
and maintenance will give many years of trouble free performance.
Storing a damp child car seat base will encourage mildew to form.
After exposure to damp conditions, dry off with a soft cloth and allow to dry thoroughly
before storing.
Store your child car seat base in a dry, safe place.
Leaving the child car seat seat in sunlight for prolonged periods may cause fabrics to
fade.
maintenance
Inspect the child car seat base regularly for signs of damage- stop using the product if
any of the component have become damaged.
When fitted to vehicle seat, check the fitting child car seat base regularly to ensure the
fitting is in good tension and the vehicle belt & harness are not objected nor twisted.
DO NOT take apart, or attempt to take apart the car seat base when cleaning. It is
unnecessary and dangerous to do so.
cleaning
Plastic and metal parts may be sponged clean with warm water and a mild detergent.
Never clean with abrasive, ammonia based, bleach based or spirit type cleaners.