koban KMD 04 Manual De Instrucciones página 26

KMD 04
Digital multimeter
Ω: Ohm (resistance)
kΩ: kilohms. 1x10
MΩ: megohms. 1x10
Hz: Hertz (frequency)
kHz: Kilohertz. 1x10
Mhz: Megahertz. 1x10
F: Farads (capacitance)
μF: microfarads 1x10
nF: nanofarad. 1x10
Overload (need to select a higher range)
Relative measurement
Current clamp attachment measurement
Buttons
Button Function
A, mA and
μA
Hold when
turning
meter
~V, -V, Ω,
mA, μA and A
Any function
Any function
except Hz/%
V~, V,
, mA, μA, A,
Hz%
Instructions manual | 26
Ω or 1.000 Ω
3
Ω or 1.000.000 Ω
6
Hz or 1.000 Hz
3
Hz or 1.000.000 Hz
6
F or 0.000001 F
-6
F or 0.000000001 F
-9
Description
Switch between functions
Switch between AC/DC
Turns off autor power off
1. Press RANGE to enter manual range.
2. Each press increases the range.
3. Hold RANGE to return to auto-range
Press HOLD to keep current reading on the
display. Press again to release the hold.
Press REL to show current reading relative to the
reading when button was pressed.
Switch between frequency and duty cycle
measurements.
www.grupotemper.com