Swing-N-Slide PB 9210 Instrucciones De Ensamblaje página 18

PB 9210 ssembly Instructions
Fig. 9
T-nut
Washer
2-1/2'' screws
Hex Bolt
2-1/2'' screw
A-Frame Assembly cont.
1. Attach A-Frame beam to Swing Beam using (2) hex bolts and 4 screws as shown in (Fig. 9).
2. Tighten hex bolt to flush with top of T-nut. Repeat steps 1 & 2 on second bracket.
18