Swing-N-Slide PB 9210 Instrucciones De Ensamblaje página 22

PB 9210 ssembly Instructions
Fig. 13
1-1/2'' screw
(2)
1-1/2'' screws
per joint
Fig. 13a
1-1/4''
Gap Typ.
Barrier Board Installation
1. Install barrier boards as shown in (Fig. 13).
Note: There will be a 1-1/4'' gap between the deck and the
bottom of the barrier boards as shown in (Fig. 13a).
2. Install decorative Angle Cut boards as shown in (Fig. 13b).
22
Fig. 13b
(2)
1-1/2'' screws
per joint