Swing-N-Slide PB 9210 Instrucciones De Ensamblaje página 26

PB 9210 ssembly Instructions
FLUSH
FLUSH
Fig. 17b
(3)
1-1/4'' Lag screws
per bracket
1-1/4'' Lag screw
Monkey Bar Assembly Cont.
1. Attach the Monkey Bar Frame to the Monkey Bar Ladder as shown in (Fig. 17).
2. With the help of others, position the finished assembly to the unit (Fig. 17a). Determine post locations. Remove
assembly and dig two 16" deep holes at the previously determined spots as shown in (Fig. 17b). Reposition
assembly to unit placing posts in the holes.
3. Level the assembly and attach to the unit using six 1-1/4" Lag screws per bracket. Fill in holes and compact earth
around posts.
Fig. 17
(3)
1-1/4'' Lag Screws
per bracket
76-1/2"
16"
Fig. 17a
31-1/2"
20-1/2"
9-1/2"
14"
26