Magic Chef MCSRG24S Manual De Instalación página 17

CAUTION: Failure to follow instructions could result in serious injury�
Shut-Off the Range
1� Turn the manual shut-off valve to the
closed position�
2� Unplug range or disconnect power�
How to Convert Gas Pressure Regulator (Natural Gas to LP Gas)
a� Plastic cover
b� Gas pressure regulator
cap with solid end
facing out
c� Gas pressure regulator
cap with hollow end
facing out
d� Washer
e� Gas pressure regulator
cap
1� Remove plastic cover from gas pressure regulator cap�
2� Turn gas pressure regulator cap counter-clockwise with a 5/8" wrench to remove�
NOTE: DO NOT remove the spring beneath the cap�
3� Remove the retainer pin that is currently positioned for use with Natural Gas�
4� Turn the retainer pin upside down and re-install into the regulator cap� It is now positioned for use with LP Gas�
5� Screw the regulator cap back into the regulator and reattach the regulator to the nipple and flare union�
How to Convert Gas Pressure Regulator (Natural Gas to LP Gas)
1� Remove the burner grates, burner
caps and burner heads�
2� Using a 7 mm nut driver, remove the
burner orifices�
3� Install the proper orifices in replace
of the ones that were removed�
4� Re-install the burner bases, heads and
top grates� Make sure the burner caps
are properly seated on the burner
heads�
To Range
b
a
c
a
Triple Ring Burner
5 Orifices
17
Manual Shut-Off Valve
"Closed" Position
Gas Supply Line
d e
Section View
d e
Section View
Orifieces
Auxiliary Burner, Semi-Rapid Burner,
Repid Burner: 1 Orifiece Each
Figure 18
Figure 19
e
e
Figure 20