King of Fans HV-20G Manual Del Propietário página 4

WALL BRACKET MOUNTING
Your fan may be wall mounted using a Wall Bracket provided.
1. Mount the Wall Bracket with the
1/4" diameter by 2-1/2" long
Lag Bolt (provided).
3. Hold fan at upright Position, place
stand on Wall Bracket Hook So that
the Rubber Feet on the Stand rest
against the wall.
5. Tilt Fan Head to desired angle.
OPERATING INSTRUCTIONS:
1. Set fan on a dry, stable and flat surface.
2. Connect power plug to any standard 120-volt AC outlet. Caution: Make sure
the Speed Control is in the"0" (off) position.
3. Pass the Supply Cord through Cord Warp Clip.
4. Change the setting on the speed control to the desired operating speed –off "0",
low "1", medium "2" or high "3".
2.Loosen Set Screw on the Wall
Bracket, save it for Step 4.
4. Tighten back the Set Screw from
Step 2 to lock the Stand in position.
6. Pass the Supply Cord through
Cord Warp Clip.