Ashley 2120206 Manual Del Usuario página 5

7. Connect the Power Transformer cable to the corresponding plug coming from the back of the chair Figure A #4
8. Connect the Power Cord into the Power Transformer Figure A #5
9. Connect the power cord into an electrical outlet near where the chair will be used Figure A #6
WARNING: Clear area below chair before opera�ng to reduce risk of injury or death.
The power bu�on is intended to allow you to disable the chair func�ons.
To stop the chair from func�oning using the power bu�on, press the Power Bu�on un�l the LED light is off.
If the chair is not func�oning, check the plug in and connec�on of the cords first (The order is A-B-C-D), see Figure A
If all connec�ons are good, verify the LED is lit on the power bu�on. See illustra�on on bo�om of page Figure A-Power Button
Be sure cords are clear from the chair prior to opera�on.
FLOOR GLIDES
-Your Ashley Power Chair has four adjustable floor glides. These glides can be adjusted to level your chair on uneven flooring. Remove
these floor glides may result in damage to your chair and flooring.
TROUBLE SHOOTING
-PROBLEM
Chair will not operate
-POSSIBLE FACTORS
Transformer may not be connected
-SOLUTIONS
Ensure both wire from the chair and the power cord is firmly conne ed to the transformer
Figure E
OPTIONAL LITHIUM BATTERY PACK:
By adding the lithium ba�ery pack to the power transformer, it enhances your exis�ng power transformer with ba�ery back-up
feature.
If you wish to purchase the lithium ba�ery pack, please contact us at 1-844-696-6886.
SIGNATURE DESIGN BY ASHLEY
®
All Rights Reserved. May , 2019 00145D Page 5 of 23