Features and Controls
Read this Operator's Manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer, to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
A
B
C
D
E
F
G
H
J
K
A - Spray Gun — Controls the application of water onto
cleaning surface with trigger device. Includes trigger lock.
B - Project Pro™ Nozzles — Detergent, 0°, 15° and 40°: for
various high pressure cleaning applications.
C - Accessory Tray — Provides convenient storage for
standard and optional accessories, such as brushes,
turbo wands, etc.
D - Nozzle Extension with Quick Connect — Allows you to
switch between four different nozzles.
E - Choke Lever — Prepares a cold engine for starting.
F - Fuel Valve — Used to turn fuel supply on and off to
engine.
G - Air Filter — Protects engine by filtering dust and debris
out of intake air.
H - Throttle Lever — Sets engine in starting mode for recoil
starter and stops a running engine.
J - Recoil Starter — Used for starting the engine manually.
K - Oil Fill — Check and add engine oil here.
L - Detergent Siphoning Tube/ Filter — Use to siphon
pressure washer safe detergents into the low pressure
stream.
M - Water Inlet — Connection for garden hose.
12
N - High Pressure Outlet — Connection for high pressure
hose.
P - Warning/Operating Instructions Tag — Identifies hazards
and proper procedure to start/stop pressure washer.
R - Oil Drain — Drain engine oil here.
S - Pump — Develops high pressure.
T - Automatic Cool Down System — Cycles water through
pump when water reaches 125°-155°F. Warm water will
discharge from pump onto ground. This system prevents
internal pump damage.
U - Hose Reel — Used for storing high pressure hose. Hose
must be detached from pump and spray gun before
storage.
V - Fuel Tank — Fill tank with regular unleaded fuel. Always
leave room for fuel expansion.
W - High Pressure Hose — Connect one end to hose reel
and the other end to spray gun.
Items Not Shown:
Data Tag (under base plate) — Provides model and serial
number of pressure washer. Please have these readily
available if calling for assistance.
Safety Goggles — Always use the enclosed safety goggles
when running your pressure washer.
W
V
U
S
T
,
R
P
N
M
L
L
BRIGGSandSTRATTON.COM