Tool it TBP 500 Manual De Instrucciones página 5

Translation of the original instructions
SAFETY INSTRUCTIONS
This manual includes guidelines on the operation of your
device and the precautions to follow for your own safety.
Ensure it is read carefully before first use and keep it handy
for future reference.
Risk of explosion and fire!
A battery being charged can emit explosive gas.
The battery tester should only be connected to batteries with
a rated output voltage of 12 V.
CAUTION: Reverse polarity will cause the fuse to blow and
could cause permanent damage. Damage due to reverse
polarity is not covered by our warranty.
CAUTION: If the car's battery is disconnected, some
management systems may be disabled.
Consult your vehicle manual for more information on
installation.
Do not use the battery tester if the cord or terminals are
damaged.
Do not use the battery tester if it has received a severe shock
or has been damaged in any way.
Do not disassemble the device. Incorrect reassembly may
result in a risk of electric shock or fire.
Acid projection hazard!
• Wear appropriate safety glasses and clothing.
• If your eyes or skin come into contact with battery acid,
rinse the affected part of the body with plenty of water and
seek immediate medical assistance.
• Avoid flames and sparks. Do not smoke.
• Protect the electrical contacts of the battery against short-
circuiting.
• The device complies with European Directive.
• The certificate of compliance is available on our website.
• EAC conformity mark (Eurasian Economic Commission)
• Material conforms to UK requirements. The UK
Declaration of Conformity is available on our website (see
cover page).
• Device compliant with Moroccan standards.
• The C‫( م‬CMIM) declaration of conformity is available on
our website.
TBP 500
EN
5