Ec Declaration Of Conformity - Proxxon BBS/S Manual De Instrucciones

Caution! Risk of injury!
Unplug from the mains in all cases.
1. Remove cover 1 after unscrewing both screws 2.
2. Unscrew screw 3 and remove collar disc 4 of the upper
timing belt pulley.
3. Remove old toothed belt 5 and fit the new sprocket belt.
4. Reassembly occurs in reverse order.
Attention:
Disconnect the mains plug prior to every adjustment,
maintenance measure or repair!
Accessories
For more detailed information on accessories, please request
our device catalogue from the address specified on the last
page in the warranty information.
Please note in general:
Proxxon bits and cutters have been designed to work with
our machines, which makes them optimal for their use.
We will not assume any liability whatsoever for the safe and
proper function of our devices when using third-party bits
and cutters!
Service note
Please note: The mains power input may only be replaced by
our Proxxon Service Department or a qualified specialist!
Disposal
Please do not dispose of the device in domestic waste! The
device contains valuable substances that can be recycled. If
you have any questions about this, please contact your local
waste management enterprise or other corresponding
municipal facilities.

EC Declaration of Conformity

Name and address of the manufacturer:
PROXXON S.A.
6-10, Härebierg
L-6868 Wecker
Product designation:
Article No.:
In sole responsibility, we declare that this product con-
forms to the following directives and normative docu-
ments:
EU EMC Directive
DIN EN 55014-1 / 08.2018
DIN EN 55014-2 / 02.2016
DIN EN 61000-3-2 / 03.2017
DIN EN 61000-3-3 / 03.2014
EU Machinery Directive
DIN EN 62841-1 / 07.2016
DIN EN 62841-2-4 / 05.2015
Date: 19.12.2018
Dipl.-Ing. Jörg Wagner
PROXXON S.A.
Machine Safety Department
The CE document authorized agent is identical with the
signatory.
BBS/S
28526
2014/30/EU
2006/42/EC
- 9 -