Pentair PENTEK WELL DEFENDER Guia De Inicio Rapido página 5

5
Pair Pentair Pentek ® Well Defender to Router via Web Browser
13. To complete the process, you
will now connect the Pentek Well
Defender to the router's wifi directly
by disconnecting your mobile device
from the Pentek Well Defender's wifi.
Open your mobile wifi settings.
To open WIFI Settings on mobile

devices: Go to Settings > WIFI or
Settings > Connections > WIFI.
14. Disconnect from the Pentek Well
Defender's wifi network or select
"Forget This Network" for the
PPSxxxxx network. The Pentek
Well Defender's Connection LED
will change to a blinking Green once
connected to the homeowner's wifi
network and then turn to solid Green when
connected directly to the internet.
If the Communication LED is Red,

verify that the router's wifi network is
working properly.
If the Communication LED stays

blinking Green, verify that the device
is setup on the App.
15. Choose how to be notified of events by
selecting an option under the Notification
Methods section of the App.
PENTEK WELL DEFENDER QUICK START GUIDE