Cooking Cycle; Give Tension To The Equipment; Switch On The Equipment; Setting Required Temperature - Lotus cooker CBRE40 Manual De Instrucciones Para El Uso

This appliance is equipped with an electronic keypad device featuring a three digit
display and LED to perform and follow all the cooking operations, (see fig. "Keypad").
Here is a list of the procedures for a safe and correct use of the appliance.
Warning! Verify the vessel that has to be in horizontal position:
The led of the key
1.

Give tension to the equipment:

Connect the appliance by turning on the main switch of the net system; the LED of
the control board near the key (5) will lights up
2.

Switch on the equipment:

Press the key
3.

Setting required temperature:

− To heat with the required temperature press the key
lights up.
− With keys
− To confirm the value press again the key
this key switch off.
Warning! : The set value remain in the keypad memory also switching off
the equipment.
4.

Setting cooking time:

− To set the cooking time press the key
around 4 sec.) :
− Whit the led lighting, with keys
INF. 0÷9h:59 min.) appearing on the display.
− The value INF excludes the cooking time (the end of cooking needs a manual).
− To confirm the value press again the key
switchs off.
Warning!: The last set cooking time remains in the keypad memory.
Warning!: The countdown of set time starts starting the cooking cycle, key
.
Instruction manual for installation and maintenance
Electric Tilting Cooker

COOKING CYCLE

light up.
. The complete keyboard lights on.
select the required temperature value (range 20÷300° C).
CBRE40
.
, the corresponding led
or wait 4 sec. till when the led of
, the corresponding led lights up (for
select the value of required time (range
,or wait 4 sec. till when the led
GB-CBRE40-DU-00 Page
6 di 10