Werner SRS-72 Instrucciones De Montaje página 2

READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING WORK.
IF YOU DON'T UNDERSTAND CALL 1-888-523-3371 FOR ASSISTANCE.
DISTRIBUTED LOAD CAPACITY 1000 LBS.
ASSEMBLY INSTRUCTIONS FOR BASE UNIT
COMPONENT DESCRIPTION
(2) End Frames
(1) Platform
(2) Side Braces
(8) Snap Pins
(4) 5" Casters
STEP 1 Identify all components according to chart above.
If any components are missing or damaged,
contact manufacturer.
STEP 2 Attach each side brace (C) to end frames (A) at
the desired platform height. Be sure the locking
pins on each side brace are fully locked in the end
frame at all 4 locations (See Fig. A)
STEP 3 Install snap pins (D) thru end frames (A) and
side brace (C) at all 4 locations. Orient as shown
in Fig. D
STEP 4 Install platform (B) so that it is fully seated and
level in both side braces (C). Be sure the deck
pins are in the engaged position (See Fig. B)
STEP 5 Install 4 casters (E) into both end frames (A) and
secure with snap pins (D). See Fig. C
WARNING:
ASSEMBLY INSTRUCTIONS FOR
STEEL ROLLING SCAFFOLD
A
B
C
D
E
• Side braces must be level and locked before using.
• All 4 casters must be locked before use.
• Follow all applicable ANSI & OSHA guidelines along with state and
local codes for the use of this product
SEE ILLUSTRATION
B
A
D
Engaged
Fig. D
E
Fig. A
Disengaged
Unlocked
Locked
Fig. B
Fig. C
C
Unlocked
Locked