Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Thank you for purchasing Wireless Panic Button. With cutting-edge
design and elegant appearance, it is easy to carry and use. This
button can only be used together with our alarm systems. In case of
emergency, the panel will alarm and you will be alerted by SMS or
calls.
Connect with Control Panel
This button should be used together with our control panels. It can
only work after being connected with the control panel.
1.
The control panel should be under the connecting state (please
refer to the instructions of each panel)
2.
Press the SOS button, the panel beeps once. The connection is
successful.
Note:
The control panel will beep twice if the panic button has been connected before.
SOS Button
Key Ring
Usage
Press the SOS button when there is an emergency. The alert SMS
for emergency will be sent or you will get a phone call from the
control panel regardless of the panel state. Then you are able to
take actions immediately.
Note:
The alarm numbers should be pre-stored in the control panel to get alert SMS or
phone call from panel when there is an alarm.
For how to store phone numbers, please refer to the manual of each control panel.
Specifications
Power Supply:
DC 3 V (one CR2032 button cell battery)
Alarm Current:
< 9.5 mA
Transmitting Distance:
< 80 m (in open area)
Radio Frequency:
868 MHz
Housing Material:
PC+ABS plastic
Operating Condition:
Temperature 0°C ~ + 55°C
Relative Humidity: < 80% (non-condensing)
Main Body Dimensions (L x W x H):
52 x 54.5 x 10 mm
EN
Publicidad
Tabla de contenido
