Brentwood Select TS-230S Instrucciones De Operación Y Seguridad página 4

Parts:
"Preheat" Light(Green)
"Ready" Light(Red)
Lid Handle
Using Your Waffle Maker:
WARNING: Avoid contact with hot parts.
1. Place your waffle maker on a sturdy and clean flat surface.
2. You can lightly coat the non-stick cooking plates with a small amount of vegetable oil. You
can use a lightly coated paper towel or pastry brush. This helps to prolong the life of your
non-stick.
3. Plug the product into a standard 120-volt AC electrical outlet, turn dial to set temperature
and preheat the appliance by closing the lid.
Attention: First use may cause a slight odor or small smoking upon heating, it is normal. This
is a result of the heating element chemical reaction. It quickly goes away.
4. When the Power is on, the red power light will come on to indicate the appliance is
preheating. Preheat your appliance for a minimum of 3 minutes. The green ready light will
come on to indicate it is ready to cook.
5. While the appliance preheats you can prepare the batter for your Waffle Maker.
6. Once the green ready light has come on raise the lid using an oven mitt to prevent any
burns.
Temperature
Dial
4
Non-Stick
Cooking Plates