Tabla de contenido
Publicidad
B
Aa
FIG. 10
10. Attach the Top Facing (B) to the Top (Aa) with Rafix Fittings and tighten. The top and facing must
be flush.
V
L
M
FIG. 11A
FIG. 11
11. The Glass Door Frames (L) come with the Glass (M) in place for security during shipping. It
is held in place with small pieces of retainer which should be removed with the glass prior to
finishing the doors.
Place the Glass Door Frame on a clean protected surface and insert the Door Glass (M) in the
notch. Cut the Glass Retainer (V) into eight pieces equal to the lengths and widths of both glass
pieces. Lay the glass retainer pieces flat on the glass and press the notched edge into the door
frame along the glass. NOTE: Cutting the retainer at a 45° angle will give a more finished look.
CAUTION: DO NOT LEAN ON GLASS WHEN WORKING ON THE DOOR.
Rev. 2/08 — 743Wa — Page 9
Publicidad
Tabla de contenido
