Troubleshooting; Removing The Radio From The Vehicle - Tait TM8100 Guía Del Usario

Ocultar thumbs Ver también para TM8100:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Removing
the Radio
from the
Vehicle

Troubleshooting

If the red, green and amber LEDs on the control head do
not light up when the radio is turned on, it is likely that
no power is reaching the radio. Check the following:
I Is the power connector firmly plugged into the rear of
the radio?
I Are the in-line fuses in good condition?
I Is the power cable securely connected to the vehicle
battery or power supply?
If all appears to be in order, then contact your radio
provider for further assistance.
a
1. Switch off the radio.
2. Unscrew the four thumb screws
radio to the U-bracket
3. Lift the radio clear of the U-bracket.
4. Disconnect the antenna
from the rear of the radio.
c
b
a
that secure the
.
b
c
and power cable
Troubleshooting 15
d
a
d

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido