b) Press CYCLE (CICLO) to enter the next step, RISE1 will appear on LCD, and then press
TIME (TEMPO) button to adjust the minutes, the number will increase rapidly if TIME
button is holding. Further press CYCLE (CICLO) to confirm.
c) In this way set the remaining steps. Upon finishing setting for all steps, press START/STOP
(INICIAR/PARAR) button to exit the setting.
d) Press START/STOP (INICIAR/PARAR) button further to activate the operation.
Note: the setting can be memorized and is effective in next use.
COLOR (COR)
With the button you can select LIGHT, MEDIUM or DARK color for the crust.
LOAF (TAMANHO)
Press this button to select the size of the bread between 1.5Lb (750g) or 2.0Lb (1000g).
Please note the total operation time may vary with the different loaf size.
TIME (TEMPO)
If you want the appliance do not start working immediately, you can use the button to set the
delay time.
The step of set delay function is as follows:
1) Select your menu, color, loaf size.
2) Set the delay time by pressing TIME (TEMPO) button. The delay time should include the
operation time of chose menu. Suppose it is 8:30PM now and you want the bread is ready
to serve at 7:00Am of next day, so the delay time should be 10 hours and 30 minutes.
Press TIME (TEMPO) button continuously until 10:30 appear on the display. The increment
of each press is 10 minutes.
3) Press the START/STOP (INICIAR/PARAR) button to activate this delay program. You can
see the dot flashed and LCD will count down to show the remaining time.
Please be noted the maximum delay time is 13 hours. And do not use any perishable
ingredients such as eggs, fresh milk, fruits, and onions in the delayed menu.
PAUSE (PAUSA)
After procedure starts up, you can press PAUSE (PAUSA) button to interrupt at any time, the
operation will be paused but the setting will be memorized, the outstanding time will be
flashed on the LCD. Press PAUSE (PAUSA) button again, the program will continue.
All manuals and user guides at all-guides.com
- 38 -