What Is Included In The Box; Top View; Rear View - Sharp PS-929 Manual De Usuario

What is included in the box

1 x PS-929
1 x Power Adapter
1 x Microphone
1 x User Manual
1 x Quick start guide
1 x Warranty Card
Panels & Controls
4 5 6
MODE LIGHT
3
SUPER BASS
MIC/GUITAR VOL
1

TOP VIEW

1. LED display
2. SUPER BASS - BASS BOOST/TWS
3. MIC/GUITAR VOL - Microphone/Guitar volume controller
4. /MODE - Mode select/STANDY ON/OFF
5. EQ/ECHO - EQ MODE/Microphone echo eff ect on/off
6. LIGHT - LED speaker lights control
7. PLAY/PAUSE/PAIR
8. Play previous track
9. Play next track
10. VOLUME - Master volume
1 3 4
USB 1
USB 2
MIC.IN GT.IN
2

REAR VIEW

1. USB - USB port for playback
2. 5V/1A - 5V 1A USB charger
3. MIC IN - Microphone input
4. GT.IN - Guitar input
5. AUX.IN - Aux input (3.5mm)
6. 15V.IN - DC power 15V input
7. Power switch - Switch device on/off
7 8 9
2 10
VOLUME
5 6 7
DC IN
AUX.IN
OFF/ON
Operation instruction
Power Connection
Connect the small plug from the supplied AC/DC Adaptor to the DC 15V
(In) Jack on the rear of unit then plug the AC/DC Adaptor to a AC wall
outlet having AC 100-240V~; 50/60Hz.
Turning On
Switch the POWER switch on the rear of the speaker to the ON position.
Then press and hold the /MODE button for 2 seconds to switch on.
To turn the speaker off , press the /MODE button for a few seconds.
Controling the master Volume
Rotate the VOLUME knob to select the desired master volume level.
Bass Boost
Press the SUPER BASS button to have extra bass eff ect, press again to turn
off .
EQ Mode select
Press the EQ/ECHO Button on the unit o to activate and set the equalizer
eff ect that best matches the music style: FLAT/CLASSIC/ROCK/POP/JAZZ/
LIVE/CLUB/DANCE/HALL/SOFT
Set lighting eff ect
Press the LIGHT button repeatedly to choose one of the following light
eff ect settings for speakers & ring lights:
Screen display Blink eff ect
L-01 Multiple colour change
L-02 Red light (in time with music rhythm)
L-03 Green light (in time with music rhythm)
L-04 Blue light (in time with music rhythm)
L-05 Yellow (in time with music rhythm)
L-06 Purple (in time with music rhythm)
L-07 Cyan (in time with music rhythm)
L-08 OFF
A long press the LIGHT button will turn the speakers & strobe lights on
and off .
Connect Bluetooth audio output device
To connect a Bluetooth audio output device (e.g. smart phone or tablet
PC), proceed as follows:
– Switch the speaker on.
– Press the /MODE button once or repeatedly until the screen shows
'bt' to switch to the Bluetooth mode. The speaker is now in pairing
mode. During this time, "BT LOGO" fl ashes on the display screen.
The party speaker will then attempt to automatically connect itself to the
last audio output device connected via Bluetooth. If this is not possible,
the speaker sends its device identifi cation via Bluetooth and 'bt' fl ashes
on the screen.
– Switch on the Bluetooth function on your audio output device and
enable search mode. On your audio output device select your speaker
"SHARP PS-929" from the list of available devices and connect the
devices. You may fi nd more information about the Bluetooth function
of your playback device in its operating instructions.
– Input the password 0000 if required. Once successfully connected,
there will be a prompt sound and the "BT LOGO" on the screen will
be solid.
EN