Operation; Display Symbols; Replacing The Batteries - A&D Medical UC-324THW Manual De Usuario

Display Symbols

Symbols
This symbol appears when the
measurement display is stable.
The progress bar displays when
the scale is finding a stable
measurement. Up to five dashes
will appear before a stable
measurement is reached.
The battery capacity is very low.

Replacing the Batteries

Caution
• Insert the battery with the positive (+) and negative (-) terminals
properly aligned with the corresponding symbols in the battery
compartment.
• Replace all four batteries with new ones, when
• Do not mix used and new batteries. It may result in damage to the
scale or shortened battery life.
• When the batteries are depleted, nothing is displayed even if the
scale is tapped to activate.
• Remove the batteries from the battery compartment when the
scale is not to be used for a long time. They may leak and damage
the scale.
Steps for Replacing Batteries
1 Remove the battery compartment cover on the
underside of the scale by gently pushing the hook
in the direction indicated by the arrow and lifting
the cover backward.
2 Install four new batteries with the positive (+) and
negative (-) terminals properly aligned with the
corresponding symbols in the battery compartment.
3 Replace the cover by sliding it into the
compartment and gently pressing into place.
Page E-4 | A&D Medical (Toll-Free): 1-888-726-9966
Description

Operation

The measurement is
complete, you may
step off.
Continue standing still
on the scale until a
stable measurement is
displayed.
Insert new batteries.
symbol appears.