Technical Data; Safety Instructions - Felisatti SCF184/1400 Instrucciones De Servicio

TECHNICAL DATA

Circular saws
Input power
No-load speed
Saw blade diameter
Max./min. saw blade diameter
Max./min. set width
Saw blade hole diameter
Depth of cut at 90º
Depth of cut at 45º
Depth setting
Inclination setting
Approx. weight (without accessories)
Follow very carefully the instructions in this manual,
save it and keep it close at hand, ready to carry out any
inspection of parts that may be necessary.
If the tool is used with care and normal maintenance is
carried out, it will work well for a long time.
The functions and use of the tool you have bought shall
be only those described in this manual. Any other use
of the tool is strictly forbidden.
ILLUSTRATIONS
DESCRIPTION (See figures)
A On/off switch. (Fig. 2)
B Mobile blade guard (Fig. 1)
C Saw blade setting disc (Fig. 1)
D Disc setting screw (Fig. 1)
E Splitting wedge (Fig. 1)
F Depth setting wing nut (Fig. 2)
G Lateral stop setting wing nut (Fig. 3)
H Lateral depth stop (Fig. 1)
I Switch safety knob (Fig. 2)
J Angular cutting wing nut (Fig. 3)
K Cutting line guide (Fig. 3)
L Machine setting wing nut (Fig. 1)
M H.M. saw blade (Fig.1)
N Splitting wedge setting screw (Fig. 1)
O Saw blade upper fixed protection (Fig.3)
EQUIPMENT
- 1 lateral stop
- 1 hexagonal key
- 1 H.M. saw blade
- Operating instructions

- Safety instructions

- Warranty
SAFETY INSTRUCTIONS
• Please see "Safety Instructions" manual, supplied
with this instruction manual.
• For your personal safety, always connect the machine
to a mains supply protected by a differential and ther-
mal cutout switch, in accordance with regulations on
low-voltage wiring sitemaps.
• Do not pierce the motor housing as this could damage
the insulation (use adhesive labels).
• Always unplug the machine before carrying out
work on it.
W
rpm
mm
mm
mm
mm
mm
mm
mm
Kg.
• Always stop the machine by switching it off, not by
unplugging it.
• Always keep the mains lead clear of the working range
of the machine.
• Only plug the machine in when it is switched off.
• Never use the machine without the guard. Keep
guards in place.
• Beware of shavings that fly off.
• When using the machine, always wear safety goggles,
gloves, a mask for protection from the dust produced
and non-slip footwear, and it is advisable to wear ear
protection when using circular saws.
• Make sure the vents are free when working with dust. If
they require cleaning, first unplug the machine, do not
insert metal objects and avoid damaging internal parts.
• Do not lock the mobile blade guard (oscillating protec-
tor) which covers the saw blade completely in the open
position during cutting operations.
• Ensure that the mobile guard and all retractable devic-
es work freely and correctly without blocking.
• Never remove the riving knife E.
• On circular saws do not use blades which are thicker
or have a tooth set which is thinner than the thickness
of the riving knife.
• Bring the saw near the workpiece only when the ma-
chine is on.
• After turning off the saw, do not attempt to stop the
blade by exerting lateral pressure.
• Do not try to cut very small workpieces.
• Do not use broken or cracked blades. Use only well
sharpened blades in good condition. Change broken or
bent blades immediately.
• Saw blades of highly alloyed, high-speed steel (HSS)
must not be used.
• Only use saw blades conforming to the specifications
contaned in these operating instructions.
• Check that the saw blade is secure and turns in the
right direction.
• Unplug the machine from the mains before changing
the blade, making adjustments or carrying out any
other maintenance work on it.
• Using the manufacturer's information, ensure that the
diameter, thickness and other characteristics of the
blade are suitable for the tool and also that the blade is
suitable for the speed of the shaft.
• Ensure that the riving knife is adjusted so that the
distance between the knife and the serrated edge of
the blade is no greater than 5 mm, and that the serrat-
SCF184/1400
1400
3,800
184
184/170
2'5/2'1
16
65
46
0-65
0-45º
4.5