EN
Introduction
The WS-20 Battery-Powered Outdoor Siren is a wireless,
weatherproof strobe siren designed to be used with the
smanos K1 or K2 alarm systems. The WS-20 will emit a loud
siren and flash rapidly to deter any would-be intruders.
Product Overview
Front View
Alarm LED
Indicators
Rear View
Status LED Indicator
Mounting Holes
Back Cover
Tamper Switch
Bracket
LED Indication
Flashes once every 5 seconds:
Mode.
Flashes once every 2 seconds for 2 hours:
out without a disarm operation.
No light indication:
the siren is in Disarm Mode.
Tamper Switch
The siren will sound at the set volume and an alarm signal
will be sent to the paired K1/K2 hub when the tamper switch
is triggered on the WS-20.
Pairing to the K1/K2 Hub
This siren needs to be paired to the K1/K2 Hub before use. To pair
the siren, please navigate to the smanos home app accessories
page and press the "+" button on the top right corner to add a new
accessory. The following in-app instructions will guide you through
the pairing process.
Once the siren has been paired, you can check the siren's
connection with your K1/K2 hub on the accessories page. There
are many settings you can customize on your WS-20. To access the
settings page, please navigate to the smanos home app accessories
page and tap on your WS-20.
the siren is in Arm/Home
the alarm timed
EN