NORTH STATES 4940 Manual De Instrucciones página 4

Figure 5A
Figure 5C
Step 7: To secure gate as an enclosure, tighten
each vertical bar counter-clockwise (hand-tight).
See Figure 5C.
Note: Loosen each vertical bar clockwise before
folding the Superyard for storage.
Step 1: Unfold the 3-in-1 Superyard.
Figure 5B
Step 6: Insert the
vertical bar into
recess of lower
hinge mount.
Press "A" down
and slide it into
upper hinge, as
shown in Figure
5B.
Note: When set
up as an
enclosure, you
will have one
extra vertical
bar.
Figure 6
Properly set-up as an enclosure.
Step 2: Position the 3-in-1 Superyard to fit in your opening.
Select the walls you wish to mount the hardware to.
Note: To accommodate different sized openings, you can add
or remove an even number of panels. Additional hardware is
available for purchase when using an odd number of panels.
Page 4