Lumbar Support; Backrest Adjustment - Grammer MAXIMO Professional Instrucciones De Manejo

Seat functions and operation

Lumbar support **

By turning the adjustment knob to the left or
right, both the height and curvature of the
backrest cushion can be individually adjusted.
This increases both the seating comfort and the
performance of the driver.
Lumbar support **
With the upper and lower switch the curvature
in the upper and lower area of the backrest
upholstery can be individually adjusted.
This increases both the seating comfort and the
performance of the driver.
The lumbar support curvature can be increased
pressing "+" or reduced by pressing "–" on the
relevant switch.
When the backrest upholstery does no longer
react to pressing "+", the maximum curvature
has been reached and the switch should be
released.

Backrest adjustment

Pull up the locking lever to release the backrest
catch. When releasing the backrest catch, do
not apply load to the backrest by pressing
against it.
By exerting pressure on or off the front or rear
part of the seat pan it can be moved to the
desired position. Release the locking lever to
lock the backrest.
It should not be possible to move the
backrest into another position after it has been
locked.
* if fitted ** depending on model *** optional extra
GB
27