Steren USB-SER Guia De Inicio Rapido página 4

8.- At the end of the process, the message Driver install success!
Displays in the screen. Click Accept.
9.- To check the driver was correctly installed in the system, open
Control Panel and locates System, Hardware, Device Manager.
10.- Choose Ports (COM & LPT) option. If the driver is correctly
installed, then appears in the available ports list as USB-SERIAL
CH340(COM16). Otherwise, repeat from step 1 to 8.
11.- Plug the desired device to the serial connector.
SPECIFICATIONS
Input:
Cable length:
Product design and specifi cations are subject to change, Product design and specifi cations are subject to change,
without notice. without notice.
5V 100mA
1,3m
ENGLISH-4