Configuration - Level One WBR-6000 Guía De Instalación Rápida

All manuals and user guides at all-guides.com
• For each active LAN (PC) connection, the LAN
LED on RJ-45 should be ON.

Configuration

1. Start your PC. If it is already started, restart it.
It will then obtain an IP Address from the Wireless
Router's DHCP Server.
2. Start your WEB browser. In the Address box, enter
the following:
3. Click Setup Wizard to proceed initial setup
4. Step through the Wizard until finished. Refer to the
data from your ISP, and the table below, to ensure
your choices are correct.
Connection Type
Dynamic IP Ad-
dress
Specified (Fixed)
IP Address
PPPoE
PPTP, Big Pond,
L2TP
5. On the final screen of the Wizard, run the test and
check that an Internet connection can be established.
• If the connection fails, check both your data and
the Cable/DSL modem.
HTTP://192.168.0.1
Data required.
Usually, none.
But some ISP may require a
particular Hostname, Domain
name, or MAC (physical) ad-
dress.
IP Address allocated to you,
and related information.
Login name and password.
Login name and password,
Server Address