Canon imageCLASS MF269dw Introducción página 8

Quick Setup
Configuring the Machine
Configuring the Initial Settings
of the Machine
The design of the operation panel differs
depending on the model of your machine. The
descriptions of the operation panel in this guide
basically presumes that the model is MF269dw.
N O T E
Parts and functions of the operation panel
P.30 "Start the Operation from the Operation
Panel"
1.
En
2.
Configure the initial settings, according to the
screen.
• Set the language and country/region.
• Set the time zone and current date/time.
• Configure the settings to prevent
unauthorized access.*
• For the purpose of confirmation, enter the
same PIN twice.
* Settings marked with an asterisk (*) may not be
displayed depending on the model you are
using.
8
Configure the settings in the following order.
Configuring the Method of
Connecting to a Computer
Before starting the configuration
• The network function cannot be used
depending on the model of the machine.
• Wireless LAN cannot be used depending
on the model of the machine.
• The machine cannot be connected to
both wired and wireless LANs at the same
time.
• If the machine is connected to an
unsecured network, your personal
information might be leaked to a third
party. Please be aware and careful of this.
• The machine does not come with a
router. Please have one ready, if
necessary.
• Even in an environment without wireless
LAN router, you can use Access Point
Mode to make a wireless connection to
the machine directly from your mobile
device (Direct Connection).
User's Guide
Specifying the connection method
Do you want to use the
wireless LAN to connect
to the network?
The settings can be
configured later.
Yes
• To connect via wireless LAN : <Yes>
• To connect via wired LAN or USB : <No>
To connect via wireless LAN
No