Parktool TW-5 Manual De Instrucciones

Park Tool Co. 5115 Hadley Ave. N., St. Paul, MN 55128 (USA) www.parktool.com
Specific torque specifications are provided by most com-
ponent manufacturers to prevent over tightening and
under tightening of bolts and nuts. Park Tool TW-5 and
TW-6 Torque Wrenches are high quality, ratcheting, click
type torque wrenches that accurately measure and apply
the proper amount of torque to a bolt or nut.
Torque Wrench Use:
1. Determine required torque for threaded fastener
(consult component manufacturer for recommended
torque specifications).
2. Flip ratchet lever to the right if turning wrench in a
clockwise direction. Flip ratchet lever to the left if
turning wrench in a counter-clockwise direction.
3. Pull locking ring to "unlock" position.
4. Turn locking ring until desired torque setting is dis-
played by cursor (red line) in scale window. For the
TW-5, major graduations on the scale are in two New-
ton Meter increments. For the TW-6, major graduations
on the scale are in four Newton Meter increments.
5. Push locking ring to "lock" position.
6. Install desired bit (not supplied) onto square head of
torque wrench. The TW-5 accepts 1/4" drive bits and
3/8" drive bits (with the included adapter). The TW-6
accepts 3/8" drive bits.
7. Place bit and wrench onto bolt or nut to be tight-
ened. Grasp handle of torque wrench and turn
with steady force until a "click" is heard and/or
felt. Immediately release force from torque wrench
after "click" .
8. Dial torque setting to lowest point on scale after
each use. Also, dial setting to lowest point when
storing torque wrench.
Calibration: TW-5 and TW-6 Torque Wrenches have
moving parts that may require service after extended
use. The wrench may be returned to Park Tool for inspec-
tion and recalibration at a reasonable charge. Visit www.
parktool.com or contact Park Tool at 651-777-6868 for
additional information.
Accuracy: The TW-5 and TW-6 are calibrated to be ac-
curate to +/-4%.
Care: The TW-5 and TW-6 are precision tools and should
be treated with care. Store carefully to avoid damage. Clean
with a dry cloth. Water and solvents should be avoided.
Warranty: Park Tool Company backs the TW-5 and TW-6
Torque Wrenches with a one-year warranty.
Torque Conversion Table and Formulas: The TW-5
and TW-6 measure torque in Newton Meters, which is
the force of one Newton on a lever that is one meter
long. A table on each wrench can be used to quickly
convert from Newton Meters to Inch Pounds, another
common unit of measure. Conversion formulas for
All manuals and user guides at all-guides.com
Ratcheting "Click Type" Torque Wrench
TW-5
3-15 Newton Meter range (26-132 Inch Pounds)
TW-6
10-60 Newton Meter range (88-530 Inch Pounds)
converting Newton Meters to Foot Pounds, Inch Pounds,
and Centimeter Kilograms are listed below:
For additional information on torque concepts, specifica-
tions, conversion tables, and torque wrench use, visit
www.parktool.com.
PARK TOOL® and the color BLUE are registered trademarks of Park Tool Co.
TORQUE CONVERSION FORMULAS
To Convert To
Inch Pounds Foot Pounds
Inch Pounds Newton Meters
Inch Pounds Centimeter Kilograms
Foot Pounds Inch Pounds
Foot Pounds Newton Meters
Foot Pounds Centimeter Kilograms
Newton Meters Inch Pounds
Newton Meters Foot Pounds
Newton Meters Centimeter Kilograms
Centimeter Kilograms Inch Pounds
Centimeter Kilograms Foot Pounds
Centimeter Kilograms Newton Meters
Square Head
Conversion Table
Handle
Lock
Unlock
Multiply by
0.08333
0.113
1.1519
12
1.356
13.825
8.85
0.7376
10.2
0.8681
0.07233
0.09807
Socket
Release
Ratchet
Lever
N-M
3
5
Scale
7
9
11
Window
Locking Ring
© 2013 Park Tool Co.
Cursor