Facom 779.CL5 Manual De Instrucciones página 6

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 11
4 - FIND MY LIGHT FUNCTION
When you want to nd a light that has been misplaced, press the dock button
for 2 seconds. Release when you hear 2 beeps. Afterwards, the light will ash
and the light alarm will activate.
Press the On/Off button on the light to turn the alarm off.
5 - OUT OF RANGE FUNCTION
When this function is active, if the light gets too far from the dock, the
connection will break. This will cause the dock and light alarm to activate and the
light to ash.
To stop the alerts, press the dock and light buttons or return the light to the dock.
By default, the Out of Range Function is deactivated on the light.
- To activate, press the light button for 5 seconds and release after you
hear 2 short beeps. The function is active if you hear 2 long beeps.
- To deactivate, press the light button for 5 seconds and release after you
hear 2 short beeps. The function is deactivated if you hear 1 long beep.
The Out of Range function is always active on the dock when the dock is
plugged in. If you want to disable the alarm on the dock, you will need to unplug the dock from the wall.
6 - OUT OF RANGE FUNCTION - POWER (PWR) SETTING
You are able to choose the distance at which the Out of Range Function will activate. There are 4 power settings
that can be selected depending on the size of the location where the lights will be used, as shown below,
MIN
MAX
The distance at which the Out of Range function alarms will activate will vary depending on the orientation of the
dock and any obstructions between the dock and the light. In an automotive or industrial workplace setting, the
average minimum distance to trigger the Out of Range alarms is 40m. To maximize this distance, set the PWR
to the maximum setting and mount the dock at against a wall with as few obstructions around the dock as
possible. Switch # 5 will have the largest impact on the distance. We recommend conducting a physical trial to
customize the alarm setting for your workplace.
7 - NORMAL USE OF THE LAMP
Press the power button once for a normal mode, twice for a boost mode, three
times to turn off the lamp.
8 - LOW CHARGE ALERT
When the light has 10 minutes of life remaining, the light will ash and the light alarm will activate.
To stop the alerts, simply return the light to the charging dock to charge it.
Please note : The Find My Light and Out of Range Function will not work once the light dies.
MAINTENANCE
Use a dry cloth with soapy water to clean both dock and light. Never immerse the dock or the light in a cleaning product.
reusable materials and components. The crossed wheeled bin symbol applied to the pro-
duct indicates that it complies with European Directive 2012/19/UE. Please inquire about
the collection of electrical and electronic products in your area. Please comply with the
local regulations. Do not dispose of this product with your normal household waste.
NU-779.CL5_0518.indd 6
Min PWR
Mid PWR-1
This product has been designed and manufactured using high quality, recyclable and
Mid PWR-2
6
?
OUT OF
RANGE
Max PWR
1 = ON / NORMAL
2 = BOOST
3 = OFF
01/06/2018 09:53:05

Publicidad

Tabla de contenido
loading

Tabla de contenido