Technical Data; Using The Gun Trigger Lock - WAGNER 0538080 Manual Del Usuario

technicAl dAtA

Max. operating pressure
Material inlet thread size
diffuser thread size
wetted parts material
operating temperature range
Maximum material temperature
Maximum sound output
weight
* Measurement location: 1.5 ft (0.5 m) away from the coating surface, 1.5 ft
(0.5 m) behind the spray gun, spray pressure 34,5 MPa, tip size 0.019.
introduction
This airless spray gun is to be used for the high pressure atomization of liquid
coating materials.

uSinG the Gun triGGer lock

Always engage the gun's trigger
lock when the gun is not in use.
1. To lock the trigger, flip the trigger
lock down until it stops in place
behind the trigger.
2. To unlock the trigger, flip the
trigger lock up until it snaps into
place on the gun handle.
NEVER point the spray gun at yourself.
18
34.5 MPa (5000 PSI)
M12 x 1.5
7/8 - 14 UN-2A
Carbide, high grade stainless steel, PTFE
40ºF to 104ºF (5ºC to 40ºC)
109ºF (43ºC)
81 dB(A)*
1.75 lb (0.8 kg) (filtered)
1.5 lb (0.68 kg) (non-filtered)
1
Gun locked
(gun will not spray)
2
Gun unlocked
(gun will spray)