Before First Use And Before Each Use; Use Of Blender Jar / Mix & Go Bottle; Crushed Ice Function; Auto Pulse Function - CASO DESIGN B 1800 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 90

14.1 Before first use and before each use

Clean the device as described under cleaning and maintenance.
14.2 Use of blender jar / Mix & Go bottle
1. Put the food in the blender jar / Mix & Go bottle, add some liquid as desired.
Fill the blender jar / Mix & Go bottle up to a maximum of 60 %.
2. Assemble the blender jar / Mix & Go bottle as described under "assembly".
3. Insert the plug.
4. Turn the knob to the desired speed (MIN-Max) or use the function button for mixing.
You can use the function buttons for both blender jar and the Mix & Go bottle.

14.2.1 CRUSHED ICE function

1. Fill the ice cubes step by step into the blender jar, so that no cluster of ice will be
produced.
2. Insert the plug
3. Turn the knob to ON. Press button CRUSHED ICE. The device will automatically crush
the icecubes. You can stop the process at any time by pressing the button ICE
CRUSHED again or by turning knob to OFF.

14.2.2 AUTO PULSE function

For example for the preparation of shakes, sorbets, baby food, mixing cooked vegetables
for soups, sauces, dips etc.
1. Insert the plug
2. Turn the knob to ON. Press button AUTO PULSE. The device will automatically mix
your food. You can stop the process at any time by pressing the button AUTO PULSE
again or by turning knob to OFF.
Warning
► Avoid the risk of burns: Please check the temperature of the food before you give it to
your baby. This can easily be done on the back of your hand.

14.2.3 SMOOTHIE function

For the preparation of creamy smoothies from fruits and vegetables.
1. Insert the plug
2. Turn the knob to ON. Press button SMOOTHIE The device will automatically mix your
food. You can stop the process at any time by pressing the button SMOOTHIE again or
by turning knob to OFF.

14.2.4 PULSE function

1. Insert the plug
2. Turn the knob to ON. Press
3. Keep the PULSE button pressed until the desired consistency is reached.
37

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

3618

Tabla de contenido