enbrighten 49539 Manual De Instrucciones

Battery Installation:
The Lantern is operated with three AA batteries (not included). Batteries must be installed or replaced in sets of three
following the instructions below.
1. Press release button 2. Unfold flashlight
*Note: Compartments must be properly snapped together to close.
Operation:
The multipurpose LED acts as a lantern, flashlight or desk light. Use
slider switch on handle to activate light modes.**
**Note: Switch positions one and two correspond to lantern and desk light operation.
Switch position three corresponds to flashlight operation.
Lantern Operation:
1. Use slider switch positions one and two to select LOW or
HIGH lantern setting
Flashlight Operation:
1. Grasp lantern by the handle, pointing lens outward
2. Use slider switch position three to select flashlight setting
Desk Light Operation:
1. Press release button and unfold into desk light
2. Use slider switch positions one or two to select LOW or
HIGH setting
WARNING
• BATTERIES MAY LEAK HARMFUL
LIQUIDS OR IGNITABLE MATERIALS
OR EXPLODE CAUSING INJURY AND
PRODUCT DAMAGE
• DO NOT MIX OLD AND NEW OR OTHER
BATTERY TYPES
• REPLACE ALL BATTERIES AT THE
SAME TIME
• REMOVE BATTERIES IF PRODUCT IS TO
BE UNUSED FOR EXTENDED PERIODS
3-IN-1 Lantern User's Guide
3. Twist counterclockwise
to remove globe
MADE IN CHINA
Distributed by Jasco Products Company LLC
10 E. Memorial Rd., Oklahoma City, OK 73114.
This Jasco product comes with a 1-year limited warranty.
Visit www.byjasco.com for warranty details.
Questions? Contact our U.S.-based Consumer Care
at 1-800-654-8483 between 7AM-8PM, M-F, Central Time.
4. Insert batteries 5. Replace globe
(noting polarity)
Pos. 1
OFF LOW
READ IT OR WATCH IT
Read instructions or watch easy-to-follow video.
Scan QR code or visit http://bit.ly/2rvnLbe
6. Rotate clockwise to
align arrows
Pos. 2 Pos. 3
HIGH FLASHLIGHT
49539, 49541, 49542, 49543, 49544
Manual V1
*
12/3/19